How to Measure for a Glass Railing Before You Order (Video)

3 min read
Frameless glass railing with a glass-to-glass clamp and slim top rail on a deck overlooking the water
On this page
  1. What you need
  2. 1. Sketch the layout
  3. 2. Number each section
  4. 3. Measure where the spigots go
  5. 4. Photograph the details
  6. More videos and guides
  7. Behind our videos

Most problems with a glass railing order start before the order is placed: a run measured in the wrong place, a corner missing from the sketch, a section nobody numbered. Our short video shows the four things to do before you order, and this post sums them up so you can follow along on your deck, balcony, stairs or pool fence.

What you need

  • A tape measure, long enough for your longest run
  • Paper and a pencil, or a notes app
  • Your phone's camera

1. Sketch the layout

Draw the area as if you were looking down on it: every straight run, every corner, the stairs and the place for a gate. It does not have to be to scale. What matters is that every place the glass will go is on the drawing, including short returns against a wall or the house.

2. Number each section

Give every straight run its own number on the sketch, for example 1 to 6 around a deck. Each number becomes a line on your order, so the glass panels and the hardware for each run are matched to it and nothing gets mixed up when the order arrives.

3. Measure where the spigots go

Measure each numbered section along the line where the spigots will be fixed, which is the line the glass will follow, and write the length on the sketch next to its number. Note what each section is fixed to (a wood deck, concrete or tile) and what is at each end: a wall, a post, a corner or the top of the stairs.

4. Photograph the details

Take a photo of each section, each corner and each end, and of the stairs and the spot for the gate. Photos show what a sketch cannot: the surface, the slope of the stairs, a downspout or a post in the way.

Before you send it

  • Measure every section twice.
  • Check your local building code for the railing height your project needs. Our guides to the Canadian and American building codes for glass railings explain what to look for.
  • If there is a gate, mark where it goes and which way it should open.

Then send your sketch, your measurements and your photos with your quote request, and our team will use them to put together the panels and hardware for each numbered section.

More videos and guides

Behind our videos

Our how-to and installation videos are planned, filmed and edited by our marketing director, Bugrahan Unsal, who has more than ten years of experience behind the camera. You can see more of his installation and project films on his site.

FAQs

1. How do you measure for a glass railing before ordering?

Measure each railing section individually along the planned installation line. Create a sketch of the layout, record all dimensions, and mark corners, stairs, and endpoints to help ensure accurate ordering.

2. What tools do you need to measure for a glass railing?

You need a measuring tape, paper and pencil, and a smartphone camera. These tools help you record dimensions, sketch the railing layout, and photograph important installation details for reference.

3. How do you measure glass railings around corners and stairs?

Measure each straight section, stair flight, and corner separately. Label every section on your sketch and take photos of angled areas, wall connections, and endpoints to help ensure proper glass panel sizing.

4. Why should you measure a glass railing twice before ordering?

Double-checking measurements helps prevent sizing errors, installation problems, and unnecessary expenses. Accurate dimensions ensure the glass panels and hardware are suitable for your railing layout and installation requirements.

5. What information should you provide when requesting a glass railing quote?

Provide a layout sketch, measurements for every section, and photos of the installation area. Also mention the mounting surface, corners, stairs, and gate locations to help determine the appropriate glass panels and hardware.

Share
Planning a glass railing?Send your measurements and we will send you a detailed quote on the materials your project needs.Get a free quote

Shop the parts

All products
Made to order

Custom Glass Railing

From $249.00
Made to order